E250-PB

Ball transfer platform for E250 semi-electric work positioner stacker

E250-PB

Ball transfer platform for E250 semi-electric work positioner stacker

Ball transfer platform for E250 stacker. Handling accessory for a semi-electric work positioner stacker, designed for B2B workstations and specific loads.

more information

	Designation
	E250-PB Ball transfer platform for E250 semi-electric work positioner stacker Weight : 18 kg

DESCRIPTION

TECHNICAL CHARACTERISTICS

Title
Ball transfer platform for E250 semi-electric work positioner stacker Stockman

Product introduction
Ball transfer platform for E250 semi-electric work positioner stacker is an accessory for the E250 semi-electric work positioner stacker. It adapts the stacker to orienting and short-distance transfer of loads placed on a platform. In a workshop, packing area or internal logistics flow, the aim is to place the load at a useful working height, keep it stable and reduce unnecessary handling around the workstation. The E250 acts as a compact mobile base. The accessory provides the load support shape required when the item cannot be handled like a standard pallet.

Use context and work environments
This accessory is intended for B2B environments where operators deal with loads of different shapes. Packing stations, light production, maintenance areas, storage rooms and preparation zones may all require a dedicated support. A reel, bin, cylindrical part, item to rotate or component to place often requires a more suitable interface than a flat platform. The E250 is a semi-electric work positioner stacker with electric lift and a compact footprint. The accessory adds more versatility for targeted tasks.

Product benefits
The main benefit of the ball transfer platform is its dedicated purpose. The operator can adapt the E250 to the load instead of moving the load to a less suitable workstation. This helps create a clearer and more stable workflow with fewer intermediate handling steps. The dedicated support also improves workstation organisation because each accessory corresponds to a specific handling need. In a multi-purpose workshop, this modular approach supports operational continuity and reduces reliance on heavier equipment changes.

Technical characteristics explained
This configuration integrates 610 x 480 mm ball transfer platform. These characteristics define the useful format of the accessory and helps check the match with the load, workstation and handling requirement. The accessory is designed for the E250 semi-electric work positioner stacker. The E250 support features a 250 kg capacity, electric lift and removable platform. Actual use must always follow the load, stability and compatibility rules that apply to the stacker and the item handled.

Structure, frame and load
The accessory acts as an interface between the load and the stacker. Its role is not to replace the stacker capacity, but to provide a more suitable support geometry. The load must remain centred, controlled and consistent with the intended use. The E250 format is useful in work areas where proximity to the machine, lifting precision and access to the load are more important than long-distance travel. The accessory choice must therefore start with the shape of the item, the handling direction and the operator task.

Speed and travel
The E250 is mainly used for short movements and positioning operations. The accessory does not turn the stacker into a heavy transport machine. It helps place the load in the right area, at the right height and on a suitable support. In production or packing areas, this approach can make movement between storage, workbench and finishing area more fluid. Travel must always be organised with a stable load, clear visibility and an open route.

Manoeuvrability and dimensions
The compact handling of the E250 is useful for tight workstations. The accessory is relevant when the operator needs to bring the load close to a table, machine, conveyor, bench or picking area. The format, 610 x 480 mm ball transfer platform, helps prepare integration into the workstation. Dimensions should be checked against the load footprint and the space available around the stacker. This avoids conflicts with obstacles, machine frames or traffic lanes.

Wheels and rolling
Rolling performance depends on the support stacker and the floor condition. The accessory should be used in an environment suitable for the E250, on a stable and clean surface. A specialised accessory does not remove the need to check the load before travel. Long, cylindrical or narrow contact loads may change the handling feel. Moderate speed, simple paths and a clear work zone support safe use.

Energy, drive and autonomy
The accessory has no power system of its own. It works with the E250 semi-electric work positioner stacker, which provides electric lifting. This combination keeps the workstation logic clear: the stacker manages the main lift and lower movement, while the accessory adapts the contact with the load. The integrated charger on the E250 supports simple return to service in areas where the equipment stays close to the workstation.

Ergonomics, MSD prevention and safety
The role of the ball transfer platform is closely linked to workstation ergonomics. Better load positioning reduces low picking, back twisting and compensation movements. The operator can work at a more regular height with better access to the load. For MSD prevention, the value comes from the combination of electric lift, compact design and suitable accessory. Safety also depends on the load rules, the condition of the accessory and a visual check before use.

Operational productivity
A well-chosen accessory reduces steps that add no value. The workstation becomes clearer because the stacker receives an interface dedicated to the flow. The operator spends less time looking for a temporary support or repositioning the load by hand. In workshops where product series change often, adapting the E250 with a specific accessory supports continuity. Productivity comes from repeated tasks that are more stable, clearer and better matched to the load support.

Typical applications
Typical applications include preparation stations, assembly workshops, packing areas, internal service tasks, short transfers and handling of non-palletised items. The accessory can also be used where the operator alternates several types of loads on the same E250 stacker.

Target users
This product is intended for industrial distributors, logistics managers, production workshops, maintenance teams and buyers who need to make an E250 stacker more versatile. It suits organisations that want to structure a handling workstation with clearly identified accessories.

Conclusion
Ball transfer platform for E250 semi-electric work positioner stacker completes the E250 semi-electric work positioner stacker with an interface for a precise professional use. To validate the choice, the load shape, workstation layout, usage frequency and limits of the support stacker must be checked together. This gives a safer and more relevant selection for real operating conditions.

Documentation

Data sheet

Ball transfer platform for E250 semi-electric work positioner stacker

Ball transfer platform for E250 semi-electric work positioner stacker

Documentation

See also...