E250-PB

Ball transfer platform for E250 semi-electric work positioner stacker

E250-PB

Ball transfer platform for E250 semi-electric work positioner stacker

Ball transfer platform for E250 stacker. Handling accessory for a semi-electric work positioner stacker, designed for B2B workstations and specific loads.

more information

	Designation
	E250-PB Ball transfer platform for E250 semi-electric work positioner stacker Weight : 18 kg

DESCRIPTION

TECHNICAL CHARACTERISTICS

E250-PB, ball transfer platform for the E250 semi-electric work positioner

The E250-PB ball transfer platform allows the E250 semi-electric work positioner to present, move and orient flat-bottomed loads at a workstation. The ball units make fine positioning easier once the load has reached the required height.

This accessory is intended for workshops, assembly areas, packing lines and inspection stations where operators need to adjust the position of a carton, rigid container, box or component without lifting its full weight again.

Orient the load directly on the positioner

Unlike a fixed platform, the ball transfer surface allows movement in several directions. The operator can bring a compatible load closer, move it sideways or rotate it to align it with a workbench, machine or adjacent item of equipment.

This function is useful for tasks requiring successive changes of orientation, including assembly, inspection, packing, labelling or transfer to a nearby area.

A 610 x 480 mm working surface

The ball transfer platform measures 610 x 480 mm and weighs 18 kg. The load footprint must be checked against these dimensions to provide sufficient support and avoid excessive overhang.

The E250-PB is designed for the E250 semi-electric work positioner. The E250 supplies powered lifting, while the ball transfer platform supports and moves the load across its surface.

Applications at preparation workstations
positioning a carton in front of a closing station ;
orienting a rigid container at an inspection point ;
transferring a flat-bottomed component to a workbench ;
aligning a load with a machine ;
carrying out successive operations on several sides of a package.

Keep the load under control

The ball units reduce resistance to movement. The load must therefore remain under the operator’s control while on the platform. Avoid sudden movement and check stability before moving the positioner.

The underside of the load must be sufficiently rigid and even to rest correctly on the balls. Keep the platform clean to maintain consistent movement.

Common questions about the E250-PB

In which directions can the load be moved?
The ball units support multidirectional movement and fine orientation adjustments on the platform.

What are the platform dimensions?
The working surface measures 610 x 480 mm.

Can the platform be used with a flexible load?
It is mainly intended for loads with a sufficiently flat and rigid base to rest correctly on the ball units.

Does the ball transfer platform automatically lock the load?
The available information does not specify an automatic locking system. The load must remain under the operator’s control.

Review your workstation with a STOCKMAN representative

Your local STOCKMAN sales representative can assess the E250-PB according to your load dimensions, supporting surface and the equipment to be served. Contact details are available on our contact page.

Documentation

Data sheet

Ball transfer platform for E250 semi-electric work positioner stacker

Ball transfer platform for E250 semi-electric work positioner stacker

Documentation

See also...

E250