PZG2-MBP

Manual mechanical jib extension 1680 mm

PZG2-MBP

Manual mechanical jib extension 1680 mm

1680 mm manual mechanical cantilever extension for compatible workshop crane. It increases the useful boom reach, subject to crane compatibility and compliance with the load chart.

more information

	Designation
	PZG2-MBP Manual mechanical jib extension 1680 mm Weight : 11 kg
	SCP02M Cantilever workshop crane with manual rotation, manual lifting and lowering 200 kg Weight : 440 kg Bar code : 3700664811413
	SCP05M Pivoting counterbalance shop crane 500 kg Weight : 608 kg Bar code : 3700664802497 Catalogue P.277
	SCP02E Cantilever workshop crane with manual rotation, 1-speed electric lifting and lowering 200 kg Weight : 440 kg Bar code : 3700664811406
	SCP05E Electric lifting pivoting counterbalance shop crane 500 kg Weight : 651 kg Bar code : 3700664802503 Catalogue P.278
	SCP02E-LP Cantilever workshop crane with manual rotation, 1-speed electric lifting and lowering, adjustable speed 200 kg Weight : 440 kg Bar code : 3700664811390
	SCP05E-LP Workshop cantilever crane, manual rotation, 1-speed electric lifting, adjustable electric lowering, manual extension 500 kg Weight : 640 kg Bar code : 3700664802510

DESCRIPTION

TECHNICAL CHARACTERISTICS

PZG2-MBP, 1680 mm manual mechanical cantilever extension Stockman

The PZG2-MBP manual mechanical extension is an optional extension designed for compatible cantilever workshop cranes. It provides a 1680 mm cantilever reach to increase the useful reach of the boom and make it easier to access a machine, assembly station or deeper drop-off area. It mounts on a compatible cantilever workshop crane to add extra outreach during lifting operations in workshops, maintenance areas or production environments.

Reaching a deeper lifting area

The PZG2-MBP is intended for situations where the standard boom or a shorter extension does not comfortably reach the lifting point. This additional reach can be useful in front of a deep machine, fixed frame, guard, worktable or hard-to-access assembly area.

With its 1680 mm cantilever reach, this extension provides additional outreach for intermediate offset requirements. It helps bring the hook closer to the load or drop-off area without moving directly to a longer extension when the workstation configuration does not require it.

A manual extension for straightforward operation

The PZG2-MBP operates mechanically and manually. It keeps a simple operating principle: position adjustment, locking check, lifting point inspection, then lifting according to the capacities authorised for the crane.

Its manual design adds reach without a dedicated motorised function on the extension. This makes it easy to integrate into routine operations while providing more working range to reach an offset load. As with any boom extension, the available capacity depends on the distance between the lifting point and the mast. The load, hook position and residual capacity must therefore be checked before each operation.

Typical applications for the 1680 mm cantilever reach

In workshops, maintenance areas or production environments, this extension can be used to:
place a part on a deeper assembly station ;
lift a component beyond a machine cover or guard ;
reach a maintenance area set back from the accessible edge ;
load or unload a part on a deep worktable ;
handle an item between two fixed pieces of equipment ;
improve access to a production line when frontal crane access is limited.

Adapting the crane to an intermediate reach requirement

The PZG2-MBP is suitable when the required reach exceeds a short offset, without needing the longest extension in the range. It adapts the crane to the actual depth of the workstation while keeping a configuration consistent with the load to be handled.

This choice helps maintain a balance between load access, crane manoeuvrability and residual capacity. Before selecting this option, it is recommended to identify the required distance between the mast and the lifting point, the weight of the loads to be handled and the obstacles present around the working area.

Key technical points
Reference: PZG2-MBP
Description: manual mechanical cantilever extension
Cantilever reach: 1680 mm
Operation type: manual
Function: boom extension / reach increase
Use: option for compatible cantilever workshop crane
Suitable environments: industrial workshop, maintenance, assembly, production, machine tools, congested or hard-to-access work areas

Choosing the right PZG2-MBP extension

Is the PZG2-MBP a motorised extension?
No. It is a manual mechanical extension.

What is the purpose of the 1680 mm cantilever reach?
It increases the working distance between the crane mast and the lifting point, making it easier to reach a load or drop-off area located further away.

Does the lifting capacity remain the same with the extension?
No. The extension increases reach, but the available capacity depends on how far the load is from the mast. Residual capacities must be checked before use.

When should the PZG2-MBP be chosen instead of the PZG1-MBP?
It is suitable when the 1300 mm cantilever reach is not enough and an intermediate offset is required to reach the lifting point correctly.

Checking compatibility of the PZG2-MBP

To confirm compatibility of the PZG2-MBP with the relevant crane, your STOCKMAN local sales representative can check the model, the load to be lifted, the required cantilever reach and the workstation constraints. Find their contact details on our contact page: https://www.stockman.fr/fr/contact.aspx

Manual mechanical jib extension 1680 mm

Manual mechanical jib extension 1680 mm

See also...

SCP05M

SCP05E

SCP05E-LP