SBAECARTEUR

Set of four raising spacers for SBA skip chassis

SBAECARTEUR

Set of four raising spacers for SBA skip chassis

Set of four steel raising spacers for SBA skip chassis. Creates under-skip clearance for stacker handling and also works as a spacer during lifting.

more information

	Designation
	SBAECARTEUR Set of 4 steel spacers for SBA skip frame, 12 mm mounting holes, RAL 9005 Weight : 2.1 kg

DESCRIPTION

TECHNICAL CHARACTERISTICS

The STOCKMAN SBAECARTEUR set of four raising spacers is designed to fit the chassis of an SBA-series self-tipping skip. These steel components are fitted underneath the chassis to create additional clearance between the skip and the floor. They help with picking up and handling the skip using suitable lifting equipment. The kit also serves as a spacer assembly and has a black RAL 9005 finish.

Create additional clearance beneath the skip chassis

When a self-tipping skip is used in a workshop, warehouse or waste collection area, moving and picking it up depend in particular on its chassis configuration and whether the forks of the handling equipment can engage beneath it.

The SBAECARTEUR spacers raise the chassis to provide more clearance beneath the skip. This makes access easier when picking up the skip, particularly when using a compatible stacker.

Installation must be assessed according to the chassis dimensions, the position of the fixing points and the specifications of the handling equipment used.

Four steel spacers supplied as a kit

The SBAECARTEUR reference comprises four steel spacers designed to be fitted to the skip chassis.

Each component measures 151 x 210 x 106 mm and has a 12 mm hole.

Together, they form a chassis-raising assembly. Component dimensions must be taken into account when assessing the installation, in particular to ensure the spacers can be positioned at the intended fixing points.

The spacers have a black painted RAL 9005 finish.

A spacing function for handling operations

In addition to raising the chassis, the components provide a spacing function when handling the skip.

This configuration may be chosen where specific clearance is required to allow the chassis to be picked up using appropriate handling equipment.

Before lifting or moving the skip, check its compatibility, the secure fixing of the spacers and the conditions under which the load can be picked up.

Designed for SBA self-tipping skips

The kit is intended for the chassis of STOCKMAN SBA-series self-tipping skips.

These skips are used to collect, move and empty waste or materials in industrial environments, workshops and logistics areas.

The raised chassis assembly is an additional fitting intended to adapt their handling configuration. Exact compatibility must be confirmed for the relevant SBA skip model and chassis.

Professional applications of SBAECARTEUR spacers
Raising the chassis of a compatible SBA self-tipping skip.
Creating clearance beneath a skip to make it easier to pick up.
Adapting a skip for handling with a suitable stacker.
Configuring waste collection equipment in a workshop.
Adapting an SBA chassis to the constraints of a handling station.
Installing spacers beneath a skip intended for lifting and moving operations.

Checks required before installation

The kit must be installed on a compatible chassis, observing the fixing points and installation requirements applicable to the skip concerned.

In particular, the position of all four spacers, the hole diameter and the clearance achieved after installation must be checked.

Fitting the spacers does not in itself change the skip's permissible load capacity. Handling operations must always comply with the manufacturer's instructions, the lifting equipment's limits and the stability requirements of the complete assembly.

SBAECARTEUR kit technical specifications
STOCKMAN reference: SBAECARTEUR.
Description: set of four raising spacers.
Application: compatible SBA skip chassis.
Number of components: 4.
Material: steel.
Installation: supplied as a kit for fitting to the chassis.
Individual dimensions: 151 x 210 x 106 mm.
Hole diameter: 12 mm.
Finish: black painted RAL 9005.
Functions: raising the chassis and providing spacing for handling operations.

Frequently asked questions about SBA skip spacers

What are the SBAECARTEUR spacers used for?
They raise the chassis of an SBA skip to create additional clearance for picking it up and handling it.

How many components are supplied in the kit?
The reference includes a set of four steel spacers to be fitted to the chassis.

What are the dimensions of one spacer?
Each component measures 151 x 210 x 106 mm and has a 12 mm hole.

Is the kit compatible with all SBA skips?
It is intended for SBA-series chassis. Compatibility must be checked against the model and configuration of the relevant skip.

Can the spacers be used to pick up the skip with a stacker?
The clearance created beneath the chassis is intended in particular to facilitate this operation. However, stacker compatibility, lifting conditions and permissible capacities must be checked before use.

Check the configuration of your SBA skip

To confirm compatibility between SBAECARTEUR spacers and your self-tipping skip, check the fixing points or determine the conditions required for lifting the load, contact your regional STOCKMAN sales representative. Their details are available on our contact page.