DT300

DT300 Rimmed Drum Handling Trolley 300 kg

DT300

DT300 Rimmed Drum Handling Trolley 300 kg

The DT300 drum trolley is designed to transport and lift a 220-litre rimmed drum up to 300 kg. It enables effortless internal handling of rimmed drums, with hydraulic lifting and controlled lowering.

more information

	Designation
	DT300 Drum handling trolley 300 kg, lift height 345 mm Weight : 40 kg Bar code : 3700664813448

DESCRIPTION

TECHNICAL CHARACTERISTICS

The DT300 rimmed drum handling trolley is designed for internal handling of 220-litre rimmed drums, in plastic or steel. With a rated capacity of 300 kg, it meets common requirements for transfer, positioning and height adjustment in workshops, technical storage areas and logistics zones.
The DT300 drum trolley is a simple, robust piece of professional equipment suitable for everyday use. Lifting is performed via a hydraulic cylinder combined with a rim-grip clamp. Two key functions define its operation: quick gripping of the drum rim and controlled lowering, with a choice of progressive or fast descent depending on the task.

A drum trolley for industrial maintenance, production and internal logistics

The DT300 is suited to environments where drums are used as storage and distribution units: industrial maintenance, production, product preparation, consumables management, fluid handling and internal collection. The trolley operates on warehouse floors, traffic aisles, ground-level storage areas, pallet edges and drop-off points.

It supports short internal flows such as removing a drum from storage, transferring it to a workstation, repositioning it to secure an area, or returning it to storage. The DT300 structures these operations and eliminates manual handling, particularly during workstation changes or transfers between zones.

Product benefits

The DT300 is designed for safer and more regular handling of rimmed drums in internal flows.
300 kg capacity for 220-litre drums: aligned with real workshop loads and typical applications.
Quick clamp gripping: direct rim engagement with a simple operating logic for repetitive cycles.
240 mm hydraulic lift: practical height adjustment to overcome small level differences and stabilise drum placement.
Progressive or fast lowering: controlled setting-down for sensitive operations or quicker cycles when appropriate.
Swivel rear wheel with brake: secures the trolley during gripping, lifting and lowering, and improves stability in confined areas.
Epoxy paint finish: surface protection suitable for workshop and storage environments.

Technical characteristics of the DT300
Structure / frame / load
The frame is specifically designed for transporting rimmed drums. The 300 kg capacity covers full or partially full drums, depending on the stored product. The clamp secures the drum during movement and limits tipping, ensuring stable transfers in internal circulation areas. With a stated weight of 40 kg, the trolley remains easy to handle while being suitable for intensive use.
Lowering control and movement
The DT300 offers two lowering modes: progressive or fast. Progressive lowering reduces shocks during drum placement, protecting the container and improving control. Fast lowering is intended for repetitive cycles where execution speed is the priority. This dual function supports a wide range of uses, from storage to workstation supply.
Manoeuvrability and dimensions
Overall width determines access through aisles and storage areas. The DT300 width of 572 mm allows use in confined environments between racking, pallets and fixed equipment. The clamp height range, from 860 to 1140 mm, facilitates adaptation to different workstation configurations.
Wheels and rolling
The DT300 is fitted with two front wheels (Ø 180 mm) and one swivel rear wheel (Ø 125 mm). This configuration ensures smooth movement on warehouse floors. The swivel rear wheel enables tight manoeuvres near workstations or racking, while the brake secures the trolley during gripping and setting-down operations.

Manual professional equipment

The DT300 is a manual handling device using a hydraulic cylinder for lifting. Maintenance is straightforward, limited to periodic checks of the cylinder and wheel condition. The 240 mm lift height provides a practical adjustment range for safe positioning during minor level changes.

Ergonomics and safety

Handling drums involves high constraints: heavy loads, difficult grip, tipping risks and pushing or pulling effort. The DT300 addresses these issues through clamp gripping and hydraulic lifting, reducing direct strain on the operator.

The braked rear wheel stabilises the trolley during critical phases, while progressive lowering improves control and limits impacts.

Overall, the DT300 contributes to reduced physical strain during repeated drum transfer and positioning tasks.

Productivity and operational gains

The DT300 streamlines drum movements between storage and use areas. Quick gripping reduces set-up time during transfer cycles. Fast lowering speeds up end-of-cycle operations when placement sensitivity is low, while progressive lowering is used in more demanding areas.

The braked swivel wheel improves stability and reduces repositioning during placement. The DT300 supports operational continuity by limiting disruptions linked to manual drum handling.

Typical applications include:
Transferring a 220-litre drum between storage and production areas
Repositioning a drum to secure a traffic zone
Levelling a drum before placement using hydraulic lift
Supplying a maintenance workstation with plastic or steel rimmed drums
Internal handling of drums in technical storage or warehouses

The DT300 is suited to organisations that manage 220-litre rimmed drums in daily operations: industrial sites, maintenance workshops, warehouses, logistics platforms, technical services and public authorities with drum storage.

This handling equipment meets needs related to heavy drum handling, reduced pushing and pulling effort, and safer internal transfers. This product will meet your customers’ needs if they are looking for:
a trolley to handle a 220-litre rimmed drum in a workshop
a hydraulic drum lifter to move a rimmed plastic drum in a warehouse
a 300 kg drum handling trolley for internal transfer in a logistics area
a drum lifting solution with progressive lowering to limit jolts
a trolley with a quick clamp for gripping and moving banded drums
handling equipment to position a drum on a pallet without pulling effort
a compact drum lifter trolley with a braked rear wheel for narrow aisles
220 L drum handling equipment for industry and maintenance
a drum lifter to secure drum transport between storage and production areas
a rimmed drum handling trolley to reduce physical strain in storage operations

The DT300 STOCKMAN drum handling trolley provides an effective solution for transporting, lifting and positioning 220-litre rimmed drums up to 300 kg, with clamp gripping and hydraulic lift.

For site-specific validation (aisle width, floor type, placement constraints), technical support helps secure correct selection and integration into internal flows. Our sales team remains available for further assistance.